Hello, Someone please help me spotting out what so weird is happening :)
I have a 2800 with an ADSL WIC connected to a 7200 with a STM-1 ATM. The 2800 is sending hellos on its virtual access interface, the 7200 is receiving those hellos and sending his, but the 2800 isn't receiving the hellos. 2800 ---- Oct 18 15:14:10.813: OSPF: Send hello to 224.0.0.5 area 0 on Virtual-Access1.1 from 62.212.6.191 7200 ---- Oct 18 15:13:50.822: OSPF: Rcv hello from 62.212.3.243 area 0 from Virtual- Access2.139 62.212.6.191 Oct 18 15:13:50.822: OSPF: Send immediate hello to nbr 62.212.3.243, src address 62.212.6.191, on Virtual-Access2.139 Oct 18 15:14:30.874: OSPF: Send hello to 224.0.0.5 area 0 on Virtual- Access2.139 from 0.0.0.0 #sh ip ospf neighbor Neighbor ID Pri State Dead Time Address Interface 62.212.3.243 0 INIT/ - 00:00:37 62.212.6.191 Virtual- Access2.139 ... The 2800 is also connected to the 7200 via a frame-relay to ATM PVC on which OSPF is running fine (but not IPv6, but that's another story). What is happening to those hello packets? Who is eating them? Thank you, Bye, -- Daniele Orlandi つづく _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
