Nathan <> wrote on Monday, October 20, 2008 10:29 AM: > Hi, > > I'm having a problem understanding how to configure EoMPLS in a > specific case, I've read lots of docs and found lots of examples, but > none that apply to my problem, so I'm not even sure that what I want > to do is possible. > > I have two 7206 G1 PE routers with client-facing ATM interfaces, > running CE-PE OSPF over the aal5snap VCs. I want one of those PEs to > speak OSPF directly to a CE connected to a VC coming in on the *other* > PE. In effect, I want to extend the VC coming in on one PE so that it > (L3) terminates on another PE. > > I don't see how to configure this, is it possible ?
you need the "routed pseudowire" feature, but this is currently only supported on the 7600 (http://www.cisco.com/en/US/docs/ios/12_2sr/release/notes/122SRrn.html#w p3970796). If this is a one-off requirement (i.e. not supposed to scale), you could use a physical loop cable :-| oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
