On Mon, Oct 20, 2008 at 12:54 PM, Oliver Boehmer (oboehmer) <[EMAIL PROTECTED]> wrote: > > you need the "routed pseudowire" feature, but this is currently only > supported on the 7600 > > If this is a one-off requirement (i.e. not supposed to scale), you could > use a physical loop cable :-|
Most definitely one-off, but what kind of loop cable would that be ? An ATM one? I'm thinking that I could terminate the aal5snap pvc into a VLAN on some convenient third PE router, and then run a straight 802.1q into the PE router I want the termination on, but mightn't there be some kind of encapsulation problem? All the examples I've seen do xconnects between VLANs or between PVCs, not between a VLAN on one hand and a PVC on the other hand. Thanks, Nathan (Anxiously waiting to see if anyone has insights on my service provider network design question from a few days ago, no one's taken me up so far ;-)) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
