On Mon, Oct 20, 2008 at 12:54 PM, Oliver Boehmer (oboehmer) <[EMAIL PROTECTED]> wrote: > Nathan <> wrote on Monday, October 20, 2008 10:29 AM: >> In effect, I want to extend the VC coming in on one PE so that it >> (L3) terminates on another PE. > > you need the "routed pseudowire" feature, but this is currently only > supported on the 7600
I decided to xconnect the physical edge router's ATm interface to a third router that has L2 connectivity to the router I want the L3 to terminate on. Should work, right ? My problem is now that the ATM subinterface does not recognize the xconnect command at all :-( (On Fa and Gi subinterfaces no problem). I've tried with and without atm route-bridged ip, on the off-chance that the command might reappear, but no such luck. Is this a limitation of the interface type or a lack that is corrected in some more recent IOS? What would the Cisco "feature" be? This is a 7206 G1 running c7200-js-mz.123-21.bin. Thanks, -- Nathan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
