Here, I had a few minutes to play in the lab:
interface Loopback0
ip address 10.0.0.1 255.255.255.0
!
interface Loopback1
ip address 10.1.0.1 255.255.255.0
!
interface Loopback2
ip address 10.2.0.1 255.255.255.0
!
interface Loopback3
ip address 10.3.0.1 255.255.255.0
!
router bgp 100
bgp log-neighbor-changes
!
address-family ipv4
redistribute connected route-map rc
no auto-summary
no synchronization
exit-address-family
!
ip prefix-list AAA seq 5 permit 10.0.0.0/8 ge 24 le 24
!
route-map rc permit 10
match ip address prefix-list AAA
set community no-export
!
R1#sh ip bgp
BGP table version is 9, local router ID is 10.3.0.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.0.0.0/24 0.0.0.0 0 32768 ?
*> 10.1.0.0/24 0.0.0.0 0 32768 ?
*> 10.2.0.0/24 0.0.0.0 0 32768 ?
*> 10.3.0.0/24 0.0.0.0 0 32768 ?
R1#sh ip bgp 10.0.0.0
BGP routing table entry for 10.0.0.0/24, version 8
Paths: (1 available, best #1, table Default-IP-Routing-Table, not
advertised to EBGP peer)
Flag: 0x8A0
Not advertised to any peer
Local
0.0.0.0 from 0.0.0.0 (10.3.0.1)
Origin incomplete, metric 0, localpref 100, weight 32768, valid,
sourced, best
Community: no-export
--
Marko
CCIE #18427 (SP)
My network blog: http://cisco.markom.info/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
