Which VTP version? V3 has more 'checks' in it, might explain it. I've never seen that with V1/V2.
Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Granzer Sent: Wednesday, December 10, 2008 4:37 AM To: [email protected] Subject: [c-nsp] SXH4 Applying VLAN changes may take few minutes Hello, did anybody see output below with SXH4 ? Why applying vlan can take a few minutes ? 6503-lab-1#conf t Enter configuration commands, one per line. End with CNTL/Z. 6503-lab-1(config)#vlan 123 6503-lab-1(config-vlan)#end % Applying VLAN changes may take few minutes. Please wait.. In lab enviroment with a few vlans configured applying vlan takes less than one second (like before with SXH and SXF). Thanks, David _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
