6503-lab-1#sh vtp status | i Version|VTP Ope VTP Version : 2 VTP Operating Mode : Transparen
David On Wed, Dec 10, 2008 at 3:50 PM, Church, Charles <[EMAIL PROTECTED]> wrote: > Which VTP version? V3 has more 'checks' in it, might explain it. I've > never seen that with V1/V2. > > Chuck > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Granzer > Sent: Wednesday, December 10, 2008 4:37 AM > To: [email protected] > Subject: [c-nsp] SXH4 Applying VLAN changes may take few minutes > > > Hello, > > did anybody see output below with SXH4 ? Why applying vlan can take a > few minutes ? > > 6503-lab-1#conf t > Enter configuration commands, one per line. End with CNTL/Z. > 6503-lab-1(config)#vlan 123 > 6503-lab-1(config-vlan)#end > % Applying VLAN changes may take few minutes. Please wait.. > > In lab enviroment with a few vlans configured applying vlan takes less > than one second (like before with SXH and SXF). > > Thanks, > David > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
