I ran into a similar problem and had to RMA a new sup/cf card from cisco. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Lima Sent: Friday, December 12, 2008 7:41 AM To: [email protected] Subject: [c-nsp] Cat6500 sup2 boot from PCMCIA
Hi all, I have a Cat6500 x6k-sup2-2ge running an IOS software. My problem is that I'm stuck in rommon mode after the IOS upgrade. Now I have A PCMCIA and I want to boot the new IOS from the PCMCIA. I cannot format the PCMCIA from the rommon mode. How can I format the PCMCIA? The only way is format from the target Catatalyst switch? All these because I have an error about invalid magic number when I insert the PCMCIA card into the Supervisor2 slot in rommon mode. Please I need your help, Thanks in advance. David _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ######################################################### The information contained in this e-mail and subsequent attachments may be privileged, confidential and protected from disclosure. This transmission is intended for the sole use of the individual and entity to whom it is addressed. If you are not the intended recipient, any dissemination, distribution or copying is strictly prohibited. If you think that you have received this message in error, please e-mail the sender at the above e-mail address. ######################################################### _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
