2 Ways I see to get it on the 3560 I have here (12.2(37)SE1 code) "show int transceiver properties" or "show int status" Either one gives me the SPF type I have in there. Ken
________________________________ From: [email protected] on behalf of Jeff Wojciechowski Sent: Fri 1/2/2009 10:36 AM To: [email protected] Subject: [c-nsp] Determine SFP type through CLI Hello All: Is there an easy way to determine the model of an SFP installed on a 3560 through the CLI? Ideally I want to match what I have installed in another 3560 that's in production. I want to add a gigabit Ethernet (copper) trunk port to another 3560 so should I be using the GLC-T, GLC-T= or something else? Thank you, Jeff Wojciechowski ------------------------------------------------------------------------------------------------------------------------------------------------------------ This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
