Hi, I'm playing with an ME3400 in our Lab, trying to set up some QoS/Shaping stuff ... I want to see whether I can limit the throughput on the uplink port (using G0/1 for that, or rather, ether-channeled g0/1+2) to any value, not shaping a certain protocol/service, but rather the whole link. I've tried all the logical choices, like vlans, IP traffic, etc., but somehow all I get when I try to set up the policy-map for the port is the error that that kind of class is not supported on the interface ... as I can't seem to find any decent explanation in the manual entries, I'm wondering which classes are actually configurable on an ME3400 ... n.b.: I'm using the MetroAccess IOS 12.2.46 on it ...
Tnx, -garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
