Garry wrote: >>> I'm playing with an ME3400 in our Lab, trying to set up some >>> QoS/Shaping stuff ... > > The only shaping I've been able to configure is somewhat "limited", > as it only allows either ~60mbit or ~111mbit ... all other > commands/settings I've tried are rejected when I try to assign > the policy map to the uplink interface ...
You could try identifying traffic in a child policy (i.e. use a 2 level hierarchical output policy) and see if the granularity is any better in the child class. It's probably not, but I don't recall. The software config guide outlines which commands can be used where. > Alternatively, I tried setting an incoming policy on the 4500, > but that one seems to be completely ignored Input policing should work on a 4500. Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
