Brad Henshaw wrote: > Garry wrote: > > >> I'm playing with an ME3400 in our Lab, trying to set up some >> > QoS/Shaping stuff ... > > I'm pretty sure the last ME3400 I had my hands on was running Metro > Access and was able to shape but only in class-default at the top level > of the policy. Granularity at anything less than about 50Mbps was pretty > much useless also. > > The Quality of Service section of the Software Configuration Guide for > your particular software version should cover everything. > The only shaping I've been able to configure is somewhat "limited", as it only allows either ~60mbit or ~111mbit ... all other commands/settings I've tried are rejected when I try to assign the policy map to the uplink interface ...
Alternatively, I tried setting an incoming policy on the 4500, but that one seems to be completely ignored, even though there at least I can configure arbitrary bit rates ... -garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
