On Thu, 2009-01-22 at 21:50 -0600, Graham Wooden wrote: > Format in the SP? It's not running the CatOS (Hybrid), so I am not > operating out of that space anymore - all I have is the RP to run commands > like that... > > Am I missing something here Toby?
I can't comment if it will do the trick/solve your original problem, but you can "format from the SP" via a remote login from RP to SP (on the running system): Switch#format ? bootflash: Filesystem to be formatted disk0: Filesystem to be formatted disk1: Filesystem to be formatted scp: Filesystem to be formatted sup-bootflash: Filesystem to be formatted Switch#remote ? command Remote command execution login Remote console login Switch#remote login ? module Remote console login module standby-rp Remote login standby-rp switch Remote console login switch Switch#remote login switch Trying Switch ... Entering CONSOLE for Switch Type "^C^C^C" to end this session Switch-sp#format ? bootflash: Filesystem to be formatted disk0: Filesystem to be formatted disk1: Filesystem to be formatted sup-bootflash: Filesystem to be formatted Switch-sp#exit [Connection to Switch closed by foreign host] Switch# This is a Sup720 (don't have any Sup2 to test with) so you might not have this option. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
