Hi Guys, I need some assistance trying to understand the out put of show dsl int atm 0 command. Specifically the 'bit errors' column.
ATM0/0/0 Alcatel 20190 chipset information ATU-R (DS) ATU-C (US) Modem Status: Showtime (DMTDSL_SHOWTIME) DSL Mode: ITU G.992.1 (G.DMT) Annex A ITU STD NUM: 0x01 0x1 Vendor ID: 'STMI' 'GSPN' Vendor Specific: 0x0000 0x0008 Vendor Country: 0x0F 0xFF Capacity Used: 15% 67% Noise Margin: 21.0 dB 8.0 dB Output Power: 13.5 dBm 2.0 dBm Attenuation: 23.0 dB 11.5 dB Defect Status: None None Last Fail Code: None Watchdog Counter: 0x2A Watchdog Resets: 0 Selftest Result: 0x00 Subfunction: 0x00 Interrupts: 3834 (0 spurious) PHY Access Err: 0 Activations: 1 LED Status: OFF LED On Time: 0 LED Off Time: 0 Init FW: embedded Operation FW: embedded FW Version: 2.542 Interleave Fast Interleave Fast Speed (kbps): 0 1536 0 512 Cells: 0 3404282 0 659208107 Reed-Solomon EC: 0 0 0 0 CRC Errors: 0 0 0 1 Header Errors: 0 0 0 0 Bit Errors: 0 48896 BER Valid sec: 0 7725096 BER Invalid sec: 0 0 LOM Monitoring : Disabled Customer is running video and is seeing lots of packet drops Thanks _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/