I second that, You're right, Basha.
I've forgot to mention it in my previous answer.
Setting interleave in the DSLAM will do automatically what I proposed before, 
lowering the speed of the link in order to improve line quality.
Ziv


-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Mateusz B?aszczyk
Sent: Monday, February 02, 2009 10:22 AM
To: Basha
Cc: [email protected]
Subject: Re: [c-nsp] show dsl int atm 0

Basha,

2009/2/2 Basha <[email protected]>:
> Hi Guys,
>
> I need some assistance trying to understand the out put of show dsl 
> int atm 0 command. Specifically the 'bit errors' column.

[...]
>                 Interleave             Fast    Interleave              
> Fast Bit Errors:               0            48896

[...]

> Customer is running video and is seeing lots of packet drops
>

Video traffic is very susceptible to bit errors due to inpulse noise.
Try enabling interleaving on the DSLAM, which should fix the problem.

Best Regards,

-mat

--
pgp-key 0x1C655CAB



 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer 
viruses.
************************************************************************************


_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to