On Tue, 10 Feb 2009, Teller, Robert wrote: |->What is the current vtp mode of the switch? |-> |->Have a 3560 I am configuring to replace a 3550. Somehow the 3560 grabbed |->a |->vtp domain name when it was connected to another switch in our lab rack. |->The switch is not part of any domain, it just pushes packets. |-> |->The 3550 being replaced has no vtp domain name. Is it possible to remove |->the vtp domain name without deleting the vlan.dat file? I have looked |->over |->the TAC but see nothing really regarding removing a vtp domain name. |->Lots |->about adding one, not about removing one. |-> |->There are two routed connections to two other switches, I don't have to |->worry about any vlan advertisments being sent from the 3560 as long as |->there are no trunks between switches correct? I'm very afraid of |->swapping |->out the switches and having vlan data overwritten...
Sorry should have posted that. VTP mode is server... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
