sh platform tcam utilization
CAM Utilization for ASIC# 0 Max Used
Masks/Values Masks/values
Unicast mac addresses: 784/6272 37/235
IPv4 IGMP groups + multicast routes: 144/1152 6/26
IPv4 unicast directly-connected routes: 784/6272 37/235
IPv4 unicast indirectly-connected routes: 272/2176 52/326
IPv4 policy based routing aces: 0/0 0/0
IPv4 qos aces: 528/528 18/18
IPv4 security aces: 1024/1024 57/57
Note: Allocation of TCAM entries per feature uses
a complex algorithm. The above information is meant
to provide an abstract view of the current TCAM utilization
Hope this helps.
On Thu, Apr 23, 2009 at 4:41 PM, Peter Rathlev <[email protected]> wrote:
> On Thu, 2009-04-23 at 16:15 -0400, Chris Lane wrote:
> > This box has been in production for over a year and doesn't really do
> > to much as you can see from my orig thread it moves about 11MB.
> >
> > This just started late last night yet we didn't add any new customer
> > nor did anybody even touch switch as the device is remote.
> >
> > I read in an older thread regarding same thing that the person
> > rebooted and of course it resolved issue. I am planning to do that
> > Early tomorrow am, but
> > i really want to know what the heck is causing this.
> >
> > Yes CEF is running.
>
> What about TCAM utilisation ("show platform tcam utilization")?
>
> Regards,
> Peter
>
>
>
--
//CL
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
