I just punted the device. Still same. Here is more info that i hope can help. sh proc cpu | exclude 0.0 CPU utilization for five seconds: 92%/66%; one minute: 90%; five minutes: 78% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 51 9075 27626 328 1.59% 1.36% 1.17% 0 Fifo Error Detec 97 9372 655 14308 1.59% 2.36% 1.21% 1 SSH Process
115 42273 13055 3238 6.22% 6.23% 5.53% 0 Hulc LED Process 123 1125 139 8093 0.15% 0.15% 0.13% 0 HQM Stack Proces 136 5432 597 9098 0.79% 0.71% 0.64% 0 PI MATM Aging Pr 168 66522 342852 194 10.54% 9.76% 8.61% 0 IP Input ------ sh proc cpu | exclude 0.0 CPU utilization for five seconds: 92%/66%; one minute: 90%; five minutes: 78% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 51 9026 27523 327 1.59% 1.36% 1.17% 0 Fifo Error Detec 97 9314 651 14307 1.59% 2.36% 1.21% 1 SSH Process 115 42156 13006 3241 6.22% 6.23% 5.53% 0 Hulc LED Process 123 1117 138 8094 0.15% 0.15% 0.13% 0 HQM Stack Proces 136 5414 595 9099 0.79% 0.71% 0.64% 0 PI MATM Aging Pr 168 66256 341597 193 10.54% 9.76% 8.61% 0 IP Input On Fri, Apr 24, 2009 at 2:31 AM, Peter Rathlev <[email protected]> wrote: > On Thu, 2009-04-23 at 19:09 -0400, Chris Lane wrote: > > sh platform tcam utilization > > > > CAM Utilization for ASIC# 0 Max Used > ... > > Hm... nothing there (unless the other ASICs show dissimilar results). If > the problem is punted traffic, maybe "show ip cef switching statistics > feature" can tell you what it is. > > It could also be traffic directed at the switch itself of course. > > Regards, > Peter > > > > -- //CL _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
