It's really hard to say without knowing some details about your network but
if you want 1 path active at once you can always use the max-paths command
set to 1.
tv
----- Original Message -----
From: "Jason Link" <[email protected]>
To: "Cisco-nsp" <[email protected]>
Sent: Wednesday, April 29, 2009 2:57 PM
Subject: [c-nsp] ASA / EIGRP / Redundant Interfaces
Hello all,
With an ASA running a redundant physical interface pair for the Inside
interface, each link connected to a separate switch which is connected
to a separate router, and everything running EIGRP, I get multiple
routes (2) to the same destination subnet, one for each of the connected
routers. This is obviously causing problems, and I can't seem to find a
way to resolve it. Setting delay on the physical interfaces doesn't
seem to take effect, and there is no variance sub-command so I can't
just force one route. This needs to function in a redundant situation,
as in if I lose a router or switch everything will continue to function
(hence the redundant interface). I tried google and cisco and found
nothing of any significance...anyone got any ideas?
Thanks!
Jason Link
Network Engineer
Wisconsin Hospitality Group / RSC
Office 414-259-8484
Cell 414-403-3110
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
