That port is directly connect to a server. so I choice type command "spanning portfast" on that interface and it works well. :)
Thanks for all yours support !!~ :) Regards, pigsign 2009/5/12 <[email protected]>: > You are using this port for UPLINK, and it could be a trunk port. I > strongly suggest you should not use portfast on this port. This way you > can avoid loops and 30 second wait will be worth it. > > Regards, > Masood > Blog: http://weblogs.com.pk/jahil/ > > >> Hi, >> >> When I plug wire into c3750g port, it would wait about "30sec" then >> change to uplink status. >> >> Are there any method can cut down uplink time? >> >> >> Regards, >> Pigsign >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
