Hi Renelson, What's the configuration register set to? (sh boot) once you're in IOS. 0x0 will bring you to rommon everytime, 0x2102 will boot the sup using the config file.
Aaron ------------- Aaron Childs Assistant Director, Networking Westfield State College http://www.wsc.ma.edu/it/ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Renelson Panosky Sent: Wednesday, June 10, 2009 12:41 PM To: [email protected] Subject: [c-nsp] need help with 6509-E with WS-SUP32-GE-3B I Have a brand new 6509-E with WS-SUP32-GE-3B booting up in rommon> mode i was able to type the command boot so it can look for the right code to boot up but after i configured the switch i turned off and turned it back on, it boot up in rommon mode again and everything was lost. I know someone had upgraded the IOS and i am sure that's what causing the problem and i know there is command i can type to fix the problem but i can't remember it or find it on the web can someone please help me out with this ? Renelson _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
