> > Check the config-register, as Aaron suggests, but also check the SP's > config-register. > > #remote command switch show boot > > If the RP shows 0x2102 but the SP is something else, that could be the > problem. To fix, go into config mode on the RP and re-enter the 0x2102 > config-register, ^Z, then write mem. > > Cheers, > Dale >
While looking at show boot, you should also verify the boot variable. It may be necessary to explicitly specify the image filename. show boot BOOT variable = disk0:c7600s72033-advipservicesk9-mz.122-33.SRC2.bin,1;,1; show star | i ^boot boot-start-marker boot system flash disk0:c7600s72033-advipservicesk9-mz.122-33.SRC2.bin boot system flash boot-end-marker _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
