Note that you can have a pim-enabled interface with ip
multicast-routing disabled and that should work too - though then the
RP CPU will be setting up state (at L3) for no particularly good
reason. The querier function is to avoid all that. Let us know if it
improves things.
Tim
At 12:40 PM 7/12/2009, Adrian Minta remarked:
Creating an unnumbered interface didn't seems to work. Now I am trying
your solution, the one with "ip igmp snooping querier". I don't want to
involve the switches in any multicast routing.
Tim Stevenson, [email protected]
Routing & Switching CCIE #5561
Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
