Tim Stevenson wrote:
Note that you can have a pim-enabled interface with ip
multicast-routing disabled and that should work too - though then the
RP CPU will be setting up state (at L3) for no particularly good
reason. The querier function is to avoid all that. Let us know if it
improves things.
Tim
No, It didn't do any good :(
Right now this is my config:
!
vlan 200
name ipTV1
!
vlan 201
name ipTV2
!
...
!
interface Vlan200
ip address 10.201.0.2 255.255.255.0
ip igmp snooping querier
shutdown
end
!
interface Vlan201
ip address 10.201.1.2 255.255.255.0
ip igmp snooping querier
shutdown
end
A switch linked with ME6500 by a trunk still receive all the active iptv
traffic, even if the above vlans are not even present on his config.
--
Best regards,
Adrian Minta MA3173-RIPE, MA314-ROTLD, www.minta.ro
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
