Tim Stevenson wrote:
Ok - if you have mrouter ports being learned, then the upstream router
should be sending IGMP queries already & IGMP snooping querier is not
required.
You may want to check the igmp snooping stats & see what type of joins
etc are being seen on 1/26. Also what is the downstream switch doing
from a snooping standpoint?
Probably you should just open a case w/TAC to get to the bottom of
this one.
Tim
At 12:01 PM 7/13/2009, Adrian Minta asserted:
Thank you all ! I think I will start this process.
--
Best regards,
Adrian Minta
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
