Hi, so I've started working with the Pix and am trying to forward port 80
and 443 in from an outside facing address to a 10.x space inside. I have
two basic interfaces (outside and inside) and am running Pix 6.3 for
firmware.
I was thinking the following line would work but wasn't sure if I formatted
it correctly.
static (outside,inside) tcp general-internet-rtr-svc-nat 80 inside-ip-object
80 netmask 255.255.255.255 0 0
general-internet-rtr-svc-nat is an object group name that contains a
network-object-host with the outside static IP defined.
Is this more or less correct? Should I invert the address objects or are
they in the proper order? Any basic pointers or pointers to good examples
would be appreciated.
Thank you
Scott
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
