Turn on 'ip cef account load per pre' and send the 'sh ip cef internal' for the prefix you are going towards.
On Wed, Jul 15, 2009 at 10:33:34PM +0200, Arie Vayner (avayner) wrote: > Joe, > > Which platform is it? > Can you share "show ip route" and "show ip cef internal"? > > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Joe Maimon > Sent: Wednesday, July 15, 2009 22:29 > To: cisco-nsp > Subject: [c-nsp] ip per-packet load-sharing on single interface > > ip per-packet load-sharing on single ethernet interface with multiple > iBGP routes installed to different nodes on that ethernet interface. > > Software router, 12.3 > > Does not seem to be balancing. Is this supposed to work? > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
