If I read those numbers right, the router seems to think it is doing per
packet load balancing.
Perhaps the problems is elsewhere. I have sent the output direct.
Thanks for your help.
Joe
Rodney Dunn wrote:
Turn on 'ip cef account load per pre'
and send the 'sh ip cef internal' for the prefix you are going towards.
On Wed, Jul 15, 2009 at 10:33:34PM +0200, Arie Vayner (avayner) wrote:
Joe,
Which platform is it?
Can you share "show ip route" and "show ip cef internal"?
Arie
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joe Maimon
Sent: Wednesday, July 15, 2009 22:29
To: cisco-nsp
Subject: [c-nsp] ip per-packet load-sharing on single interface
ip per-packet load-sharing on single ethernet interface with multiple
iBGP routes installed to different nodes on that ethernet interface.
Software router, 12.3
Does not seem to be balancing. Is this supposed to work?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
