If this is the wrong question for this newsgroup my apologies Been having trouble setting up vlans on a Cisco 2950 switch. I add one using the typical method via CLI:
Int vlan x Ip address 192.xxx.yyy.zzz 255.255.255.240 No ip route-cache No shut The CLI screen notes that the vlan is up. As soon as I add another vlan (vlan y) vlan y will come up but vlan x will administratively go down. This process is repeated each time I add a vlan so that only one vlan is up at any one time, which is the last vlan created. Please note that I have vlan 1 shutdown and it is not used. Question is how do I keep all my vlans up simultaneously? Thanks in advance... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
