Hi Randy, What platform? On 6500/7600 the answer is yes, you need mls qos vlan-based on the physical interfaces and then you can police on the SVI.
Ian -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Randy McAnally Sent: 08 September 2009 11:40 To: [email protected] Subject: [c-nsp] service-policy on virtual interface Do the same commands work e.g. 'service-policy input/output FooPolicy' at the virtual interface level the same as they do on a physical port, both in and out? I'm trying to set up rate limiting 'further up the line' rather than at the network edge, so we can pool customer bandwidth and keep inbound floods of traffic from being passed beyond the distribution layer. -- Randy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/07/09 18:03:00 -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Any offers or quotation of service are subject to formal specification. Errors and omissions excepted. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Lumison. Finally, the recipient should check this email and any attachments for the presence of viruses. Lumison accept no liability for any damage caused by any virus transmitted by this email. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
