:)
A common issue with routers is that they have interfaces the processors
can't keep up with. i.e. a 2621 router has two built in 100baseT
Better worded, a common issue with vendor C is that they have processors
that the interfaces can't keep up with. Other vendors including one that
starts with a J have fewer issues in this area.;)
----- Original Message -----
From: "Seth Mattinen" <[email protected]>
To: <[email protected]>
Sent: Tuesday, September 29, 2009 10:06 AM
Subject: Re: [c-nsp] cisco 7206 VXR router
Jon Lewis wrote:
On Tue, 29 Sep 2009, jack daniels wrote:
I'm a bit confused on -
"Also, don't assume that because you can add 8 100Mbit interfaces, that
you can use them at full speed.."
A common issue with routers is that they have interfaces the processors
can't keep up with. i.e. a 2621 router has two built in 100baseT
interfaces. Try routing 100mbit/s of traffic through a 2621, and you'll
be disappointed.
2801 and 2811 have 10/100 ports, the 2821 has 1000/100/10 ports. Same
principle still applies though. ;)
~Seth
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
