something like this should work (got it off one of production router):
interface Serial0/0/0
mtu 4470
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
interface Serial0/1/0
mtu 4470
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
interface Multilink1
mtu 4470
ip address 192.168.11.205 255.255.255.252
ppp multilink
ppp multilink group 1
ppp multilink fragment disable
Regards,
Ge Moua | Email: [email protected]
Network Design Engineer
University of Minnesota | Networking & Telecommunications Services
Dominic wrote on 10/20/2009 10:05 AM:
Hi Everyone:
Two questions:
1. I need to bond two T1 circuits. Does anyone have a working sample
config? The POP end is a 7206VXR with NPE-G2 and the PA-MC-2T3-EC
Card, and the customer end is a Cisco 1841.
2. Also need to bond as many as 4 T1s. Would that be pushing it, and
what would generally be the cleanest way to do it?
Dominic
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
