Looks like I'm late to the game but I would recommend MLPPP. Note the EC
card has the MLPPP offload so I would stick with those.
The only thing to be aware of is always turn off frag (I believe you have
received config examples of this).
http://www.cisco.com/en/US/prod/collateral/modules/ps2033/prod_white_paper0900aecd8056d3cb.html
tv
----- Original Message -----
From: "Dominic" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 20, 2009 10:05 AM
Subject: [c-nsp] Bonded T1 Circuits
Hi Everyone:
Two questions:
1. I need to bond two T1 circuits. Does anyone have a working sample
config? The POP end is a 7206VXR with NPE-G2 and the PA-MC-2T3-EC Card,
and the customer end is a Cisco 1841.
2. Also need to bond as many as 4 T1s. Would that be pushing it, and what
would generally be the cleanest way to do it?
Dominic
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
