PIX code below 7 doesn't support hairpinning.
tv
----- Original Message -----
From: "Graham Wooden" <[email protected]>
To: "cisco-nsp" <[email protected]>
Sent: Sunday, November 29, 2009 9:53 PM
Subject: [c-nsp] Client VPN issue with PIX v6.3
Hi all,
One of my VPN devices is a 525 running v6.3.5. I am having an issue with
Client VPN sessions coming in on the outside interface while accessing
subnets that are reached by outside interface. I can access the "inside"
interface addresses just fine. Is there some sort of limitation that I
can't access subnets out past the outside interface while having VPN
sessions terminating on the same interface? I tried to add these subnets
to
the split-tunnel acl with no love either.
Thoughts? I have a v7.0.2 525 that is being tied up with another setup,
so
I can't test on 7.x code - but if if an upgrade is needed to solve this,
let
me know...
Thanks!
-graham
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
