Very good suggestion, however the provider is not sending the internet routing table, only our own internal network's routes. Or are you suggesting some providers make mistakes and send full internet tables to a private VRF customer? We already had our layer-2 VPN MPLS provider join our network with someone else's, and we learned the hard way why you should never ever ever connect a layer-2 switch to that provider, especically one that doesn't support turning off VTP on an interface. Oh yeah and using VTP passwords doens't hurt either :)
On Wed, Jan 13, 2010 at 4:20 PM, Richard A Steenbergen <[email protected]>wrote: > On Wed, Jan 13, 2010 at 12:31:41PM -0800, Cord MacLeod wrote: > > > > I think you are looking for redistribution. Make sure you have plenty > > of filters in the way of this, but that's what you are looking for. > > > > router ospf xxx > > redistribute bgp xxxx route-map blah > > Don't forget to double check your out of band and remote reboot power > strips for the day someone types "no redistribute bgp xxxx route-map > blah" thinking it will remote the entire line instead of just the > route-map, 'cause that router will be going down in flames. :) > > -- > Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras > GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
