I have experienced this exact same issue as well. I was told by my SE
that it had to do with the way the input was connected to the rest of
the unit.
Scott
On Jan 25, 2010, at 8:55 PM, Vincent C Jones wrote:
Another possibility, given that it is a PIX501, is a loose power
connection. Some of the older PIX 501s were so sensitive it seemed
they
would power cycle if you so much as looked at them. Moving the box, or
even bumping into the desk they were on, could reboot them. Crazy,
because otherwise they are solid and will run for years with no
issues.
Good luck and good hunting!
--
Vincent C. Jones
Networking Unlimited, Inc.
Phone: +1 201 568-7810
[email protected]
On Mon, 2010-01-25 at 18:46 -0500, Jason Gurtz wrote:
After each drop this counter returns to 0 which tells me the Pix is
rebooting for some reason.
[...]
experienced this. The software rev is 6.3.
We experienced this on a 515E running 6.3 code. A move to the 7.0
series
solved this issue.
I can't remember what exactly we saw using console but IIRC was
something
like runaway memory use.
~JasonG
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Scott Keoseyan
[email protected]
704-443-8229
Homepage - http://www.labyrinth.org/homepages/scott
Blog - http://www.labyrinth.org/wp1
PGP Key - http://www.labyrinth.org/homepages/scott/pgp.html
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
