Tried that as well as with a new cable, still no luck. Next I'm going to
capture the console output and see if that sheds any light on anything.
----- Original Message -----
From: "Jason LeBlanc" <[email protected]>
To: "Justin Shore" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, January 27, 2010 1:49 PM
Subject: Re: [c-nsp] Self rebooting pix?
The point of termination between the pix and the power supply end point
(shaped like a 7) is a known issue. If it moves at all or gets bumped at
all it will reboot the devices. To rule this out you can try to zip tie
it to the device in an effort to keep it still. If there is no possible
movement and it still occurs it is most likely overheating as previously
mentioned.
On Jan 27, 2010, at 1:30 PM, Justin Shore wrote:
Jason Gurtz wrote:
After each drop this counter returns to 0 which tells me the Pix is
rebooting for some reason.
[...]
experienced this. The software rev is 6.3.
We experienced this on a 515E running 6.3 code. A move to the 7.0
series
solved this issue.
Same thing here. It would crash about once a month on us but the
duration was show short that it was seldom ever noticed. It only took 45
seconds to boot. We solved it by installing ASAs. :-)
Justin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
