Thanks very much John. I've seen the use of that pvc range command before but haven't ever really messed with it much. I'll give that a shot.
The OC3 side of the config looks pretty straight forward. Thanks for the input! -Nick Voth > From: John Osmon <[email protected]> > Date: Sat, 27 Feb 2010 19:34:03 -0700 > To: Nick Voth <[email protected]> > Cc: <[email protected]> > Subject: Re: [c-nsp] Newbie question on OC3 on 7206VXR > > On Sat, Feb 27, 2010 at 08:23:55AM -0700, Nick Voth wrote: > [...Qwest ATM for DSL -- config request...] > >> The card I've been told will work for the OC3 is a PA-A3-OC3SMI. I'm just >> curious if anyone has any tips or tricks for a similar setup. I'd really >> love to avoid the "banging my head on the desk" stage in this setup... > > Below is a cut-n-paste from another Qwest OC-3 aggregation port. > We used a PA-A3-OC3SMI: > !Slot 6: type ATM WAN OC3 SMI, 1 ports > !Slot 6: hvers 2.0 rev A0 > !Slot 6: part 73-2427-04 > > I won't guarantee that it is the ideal solution -- but it worked for > several years. The 'range' command is useful to keep your config > looking cleaner. The 'pvc-in-range' command is useful for "one off" > situations. > > Hope this helps... (If it is useful, an engineer that worked for me > put things together. If it isn't useful -- it's all my fault...) > > ! > interface ATM6/0 > description Qwest DSL aggregation > no ip address > no atm ilmi-keepalive > no atm enable-ilmi-trap > bundle-enable > ! > interface ATM6/0.10000 point-to-point > description DSL Qwest > no atm enable-ilmi-trap > range qwestdslA pvc 1/32 1/1023 > dbs enable > encapsulation aal5mux ppp Virtual-Template1 > ! > pvc-in-range 1/53 > encapsulation aal5mux ppp Virtual-Template2 > ! > interface Virtual-Template1 > ip unnumbered Loopback1 > ip verify unicast reverse-path > no logging event link-status > peer default ip address pool default > ppp authentication pap > ppp multilink > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
