Hello all I am trying to test IPv6 configuration for PPPoE / DHCP-PD termination. I have trouble assigning a "static" /128 IPv6 address through radius.
I use the following simple config for the LNS interface Virtual-Template100 ip unnumbered Loopback4 no ipv6 nd prefix framed-ipv6-prefix ipv6 enable ipv6 nd other-config-flag no ipv6 nd ra suppress ipv6 dhcp server LAN peer default ip address pool v4_POOL peer default ipv6 pool PPPOE ppp authentication chap ppp ipcp dns 10.0.1.1 ipv6 local pool PPPOE 2001:100::/64 128 shared ipv6 local pool LAN 2001:200::/48 64 Using the Radius-Attribute Cisco-AVPair = "ipv6:prefix#1=2001:1::/64 0 0 onlink autoconfig" the router can statically define the prefix assigned through the DHCP-PD to the CPE I cannot find the appropriate Radius-Attribute for statically defining the IPv6 address for the CPE's PPP interface. Does anyone knows how to define through radius the IPv6 address that can assigned to a PPP user? Thanx for your help _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
