Victor Lyapunov <[email protected]> writes: > Using the Radius-Attribute Cisco-AVPair = "ipv6:prefix#1=2001:1::/64 0 > 0 onlink autoconfig" the router can statically define the prefix > assigned through the DHCP-PD to the CPE > > I cannot find the appropriate Radius-Attribute for statically defining > the IPv6 address for the CPE's PPP interface. > > Does anyone knows how to define through radius the IPv6 address that > can assigned to a PPP user?
We are using Framed-IPv6-Prefix + Framed-Interface-Id (RFC 3162) to achieve this with Juniper ERXes. The Framed-Interface-Id is used by IPV6CP and Framed-IPv6-Prefix is used by SLAAC. Together they force a full /128 static adress on the ppp-interface. I assume something similar is possible with Cisco boxes. Bjørn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
