Victor Lyapunov <[email protected]> writes: > Hello Bjørn, Gert > > Bjørn have you tried using the "Framed-Interface-Id" with a Cisco CPE?
No, I'm afraid I haven't. > I have tried the combination Framed-Interface-Id + Framed-IPv6-Prefix > with no luck so far > (The /64 prefix is applied to the dialer interface but the last 64 > bits of the PPP interface > address are not affected by the Framed-Interface-Id attribute) > > In the ERX which attribute do you use for defining the Prefix > delegated through DHCP-PD? That would be the Delegated-IPv6-Prefix (RFC 4818). This is not a default configuration, but must be configured using aaa ipv6-nd-ra-prefix framed-ipv6-prefix aaa dhcpv6-delegated-prefix delegated-ipv6-prefix The ERX default is to use the Framed-IPv6-Prefix for PD. Bjørn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
