Hi, > Peter: your mail server needs IPv6... puck has (again), since about half > a year or so, but your mail server delivered over IPv4... > > Received: from mail1.rm.dk (mail1.aaa.dk [193.162.116.36]) > by puck.nether.net (8.14.4/8.12.9) with ESMTP id o2GM1tCq084058 > > "one small step at a time" :-)
;-) this is how we've been doing some of it. IPv6 enable our DNS, RADIUS servers etc and get that used.... IPv6 enable some of our resources... most of the daemons/servers out there will happily use IPv6 if the host is enabled....and most of them even follow the RFC and PREFER the IPv6 over the IPv4. slowly , but surely, request arrive..and are answered..in IPv6 instead of IPv4. fundamentally, on that level at least, there is no difference. oh , apart from all your old systems that use IPv4 ACL and allow constructs. alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
