Hello there I am trying to upgrade IOS on an 827 I have to 12.4(5c). The 827 has 24MB of DRAM, and this is the highest version that cisco.com says will run inside 24MB. After I load the image on to the 827 and reload, I get
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! and the router reloads, tries to boot, runs out of RAM, reloads, etc, etc, etc. When booting from an image that does work, show ver confirms that there is 24MB of DRAM in the router CISCO C827 (MPC855T) processor (revision 0x701) with 23552K/1024K bytes of memory. Is there any way to get this image to boot, or do I have no choice but to upgrade the DRAM? TIA Steve _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
