Once again, unbelievable ! Thanks a lot M. Cisco for making my nights easier !
Y. 2010/3/22 William McCall <[email protected]> > The explanation I got from Cisco was that this is working as designed. > During the failure, it is supposed to 0x0 to prevent a loop. I said > "bs" but they stuck by it *shrug*. > > --WM > > On 3/22/10, Youssef Bengelloun-Zahr <[email protected]> wrote: > > Hello all, > > > > Solved it, that did the trick. > > > > Question is : how could that happen ? > > > > I'd better check that my production chassis are ok :-) > > > > Thanks. > > > > Y. > > > > > > > > 2010/3/22 Youssef Bengelloun-Zahr <[email protected]> > > > >> Hey, > >> > >> Googled it, found this : > >> > >> > >> > http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00803e5282.shtml > >> > >> Will that solv my problems ? > >> > >> Thanks. > >> > >> Y. > >> > >> > >> > >> 2010/3/22 Youssef Bengelloun-Zahr <[email protected]> > >> > >> Hello all, > >>> > >>> Here is the result : > >>> > >>> BB1.IX1#remote command switch sh bootvar > >>> > >>> BOOT variable = > >>> bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXH2a.bin,1; > >>> CONFIG_FILE variable does not exist > >>> BOOTLDR variable does not exist > >>> Configuration register is 0x2100 > >>> > >>> Confregs aren't identical ? How do I change this ? > >>> > >>> How come is this possible ? > >>> > >>> Thanks. > >>> > >>> Y. > >>> > >>> > >>> > >>> 2010/3/22 Dale Shaw > >>> <[email protected] <dale.shaw%[email protected]>< > dale.shaw%[email protected] <dale.shaw%[email protected]>> > >>> > > >>> > >>> Hi, > >>>> > >>>> On Mon, Mar 22, 2010 at 10:08 PM, Youssef Bengelloun-Zahr > >>>> <[email protected]> wrote: > >>>> > > >>>> > My bootvar / confreg looks correct to me, doesn't it ? > >>>> > >>>> What does this give you? > >>>> > >>>> #remote command switch sh bootvar > >>>> > >>>> cheers, > >>>> Dale > >>>> > >>> > >>> > >>> > >>> -- > >>> Youssef BENGELLOUN-ZAHR ……………………………………………… > >>> Ingénieur Réseaux et Télécoms > >>> > >>> > >>> Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > >>> Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > >>> Tel +33 (0) 825 000 720 > >>> Tel. direct +33 (0) 1 77 35 59 14 > >>> Tel. portable +33 (0) 6 22 42 63 80 > >>> Email [email protected] > >>> ……………………………………………………………………………….....www.720.fr > >>> > >>> > >> > >> > >> -- > >> Youssef BENGELLOUN-ZAHR ……………………………………………… > >> Ingénieur Réseaux et Télécoms > >> > >> > >> Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > >> Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > >> Tel +33 (0) 825 000 720 > >> Tel. direct +33 (0) 1 77 35 59 14 > >> Tel. portable +33 (0) 6 22 42 63 80 > >> Email [email protected] > >> ……………………………………………………………………………….....www.720.fr > >> > >> > > > > > > -- > > Youssef BENGELLOUN-ZAHR ……………………………………………… > > Ingénieur Réseaux et Télécoms > > > > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > > Tel +33 (0) 825 000 720 > > Tel. direct +33 (0) 1 77 35 59 14 > > Tel. portable +33 (0) 6 22 42 63 80 > > Email [email protected] > > ……………………………………………………………………………….....www.720.fr > > > > -- > Sent from my mobile device > > William McCall, CCIE #25044 > -- Youssef BENGELLOUN-ZAHR ……………………………………………… Ingénieur Réseaux et Télécoms Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE Tel +33 (0) 825 000 720 Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Email [email protected] ……………………………………………………………………………….....www.720.fr _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
