You know that NEBs has different levels of compliance ? http://www.nebs-faq.com/what_is_nebs_level_3.htm
If this is for a short term ( 1 month or 6 ? ) do you REALLY need a super duper studly box ? Are you going to have to do the conversion from an OC circuit or can you get this in a gigE ? Carriers have adopted over the last few years and optical is not always the only choice If you could get away with gigE you could buy a 3845 w/gig of ram for under 5K - I have a 3845 in test lab w/2 1GB and some optical. 7201s can go to 2 gb ram and have a PA slot Are you going to be doing POS, ATM, ????. Is your rendundancy requirements 2 holes in one box ? 2 boxes ? Is the interface OC12 but with a lower pps requirements ? If you could get away with a 7206 shoot me an email I may have one or two I could lend if they would work <http://www.nebs-faq.com/what_is_nebs_level_3.htm> > Message: 4 > Date: Tue, 30 Mar 2010 15:34:56 -0400 > From: Rich Davies <[email protected]> > To: [email protected] > Subject: [c-nsp] Need input for router purchase > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > Hello, > > I am involved with a short-term project involving the purchase/installation > of a Cisco router which is capable of the following: > > - OC-12 WAN interface > - High throughout (PPS) > - Redundancy > - Full routing table > > I have looked at the 7600 and it is a viable option however we are also > looking at anything that will help cut costs down (i.e., 7206 VXR with NPE > G1/G2 and so on). One "key" thing we need is this equipment will be > installed with a carrier that has high demands (NEBS compliancy etc). > What would be the best router to investigate for such needs? (ASR?) > > > -Rich > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
