On Wed, Mar 31, 2010 at 7:13 AM, <[email protected]> wrote: > Thank you all for the input on router selection. > > Even though the power supplies are on the rear of the 7200 it seems it is on > the allowed equipment listing for the carrier we are going to be co-locating > with. > > It turns out that the OC-12 requirement was changed to OC-3. This is making > us lean towards 7200's (we have 7200 spares already from left over dial > shelves). Can anyone tell me what is the performance (Mb/s, PPS) I would > expect to get out of a NPE-G1 and also can it handle full internet routing > table (with max memory)? Also what is the most stable/trusted ver of IOS > for 7200 with NPE-G1 (BGP internet router... no MPLS). > > Thanks again for all your input!
NPE-G1 can do full routes and maxes at 1GB ram (even NPE-400 can do full routes w/ 512mb). For ballpark performance numbers see: http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf We currently run 12.2SB on our 7200s but you could do 12.4 mainline as well. --Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
