My usual plan of attack is to capture "execute on all show controller fia". If all the linecards are seeing incrementing CRC16s to the same SFC then the SFC is likely the problem. If only one linecard is seeing CRC16 errors to one or more SFCs then I would suspect the linecard or how well is seated in the chassis. A bad CSC or bent slot pins can create problems very difficult to diagnose. Next steps if you can't isolate to a specific SFC / linecard would be to switch the master CSC and then try moving the linecard to another spare slot.
Clinton. On 2010-03-31 12:29, Sascha E. Pollok wrote:
was that "sh contr fia" you posted as seen from slot 1? i.e. execute-on sl 1 sh contr fia ? Sascha
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
