I actually already disabled (powered off) the SFC that was tossing the LOS error
On slot 1 it says:
>From Fabric FIA Errors
-----------------------
cell fifo parity 0 no 125 MHz clock 0
cell processor ctrl wd error 0 reassembly mem ctrl wd error 0
reassembly mem single ECC 0 reassembly mem multi ECC 0
first last err 0 sequence err 0 pkt length err 0
Switch cards present: 0x17
Switch cards monitored: 0x17
0 1 2 3 4
-------- -------- -------- -------- --------
los 0 0 0 0 0
state Off Off Off Off Off
crc16 0 0 0 0 0
on the chassis itself (sh cont fia) it says:
Slot: 18 19 20 21 22
Name: sfc0 sfc1 sfc2 sfc3 sfc4
-------- -------- -------- -------- --------
los 0 0 0 0 0
state Off Off Off Off Off
crc16 2 2 2 0 2
Slot 21 is disabled which is why it doesnt have any CRC16s I suppose.
on my other 12810 it says 0 for all CRC16.
thanks,
-Drew
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mikael Abrahamsson
Sent: Thursday, April 01, 2010 12:44 AM
To: Sascha E. Pollok
Cc: Clinton Work; [email protected]
Subject: Re: [c-nsp] CRC16 in 'show cont fia' on GSR 12810
On Wed, 31 Mar 2010, Sascha E. Pollok wrote:
> Done that a few times and it always led somewhere.
+1.
Last time this happened to me, re-seating the SFC in question made the
problem go away.
--
Mikael Abrahamsson email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
