Cisco 12010, Cisco 12410, and Cisco 12810 Router Clock and Scheduler,
Switch Fabric, and Alarm Card Replacement Instructions
http://www.cisco.com/en/US/docs/routers/12000/12010s/maintenance/guide/15874csa.html#wp40448
Hope that helps.
Shimol
On 3/31/10 3:52 PM, Clinton Work wrote:
My usual plan of attack is to capture "execute on all show controller
fia". If all the linecards are seeing incrementing CRC16s to the same
SFC then the SFC is likely the problem. If only one linecard is seeing
CRC16 errors to one or more SFCs then I would suspect the linecard or
how well is seated in the chassis. A bad CSC or bent slot pins can
create problems very difficult to diagnose. Next steps if you can't
isolate to a specific SFC / linecard would be to switch the master CSC
and then try moving the linecard to another spare slot.
Clinton.
On 2010-03-31 12:29, Sascha E. Pollok wrote:
was that "sh contr fia" you posted as seen from slot 1? i.e.
execute-on sl 1 sh contr fia ?
Sascha
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
