Actually, i just figured it out. from the Cymru site: "If you wish to receive both IPv4 and IPv6 fullbogons over the same peering session, you will typically need to replicate the statements in the above example's "address-family ipv6" section to an "address-family ipv4" section, with an appropriate change to the prefix-list applied to the peer-group."
If you need something more specific, hit me offlist and i'll show you my config. ---- ---- ---- ---- Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP http://uplogon.com | +1 906 774 4847 | [email protected] On 4/16/2010 1:37 PM, Chris Gotstein wrote: > Team Cyrmu is doing this with their full bogon feeds over BGP. I'm > trying it right now, but i'm only get IPv6 info and not the IPv4 info. > So i'd be interested in learning about this as well. > > ---- ---- ---- ---- > Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP > http://uplogon.com | +1 906 774 4847 | [email protected] > > On 4/16/2010 1:29 PM, Grzegorz Janoszka wrote: >> >> Does anybody know how to receive both v4 and v6 prefixes onto one BGP >> session? There is a RFC document about it RFC2858 which is quite old (10 >> years). I know some other vendors support it, as we have just got a peer >> which feeds us with both families prefixes on one BGP session, at least >> it tries, as we always see only one type of addresses - v4 either v6, >> never both. Any tricks to do it with Cisco? We use IOS XR (CRS-1's), but >> we may also get this feed on a "normal" IOS (6500). >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
